Rear three-quarter view of Bluey on a gravel lot with trees behind
2014 Ford F-350 Super Duty

Bluey

6.7L Power Stroke, SuperCab, 4x4. Owner-maintained in midcoast Maine and still going.

10oil analyses on file
0 qtoil added between changes
VIN
1FT8X3BT8EEA75966
Model
F-350 SRW SuperCab 4x4, FX4
Engine
6.7L Power Stroke V8 turbodiesel
Transmission
6R140 6-speed automatic
Wheelbase
142 in
Paint
Blue Jeans Metallic (N1)
Rear axle
Sterling 10.25
Oil
Amsoil Signature Series 5W-40
Blackstone Laboratories

Oil analysis

Ten samples from 94,307 to 223,000 miles. Every report came back clean: no coolant, no water, fuel never above 0.5%.

13–15 ppmIron at 6,000–7,000 mi oil runs. Blackstone's universal average is about 24–27 ppm.
≤ 0.5%Fuel dilution on every sample. Lab limit is 2.0%.
0.0%Antifreeze and water, every sample.
Iron (ppm) per sample, labeled with miles on the oil. Higher bars line up with longer oil runs, as expected.
Sample dateOdometerMiles on oilOilIronAlum.ChromeSiliconFuel %Visc. cSt
Service record

Repairs & maintenance

Genuine Ford and Motorcraft parts wherever possible. Part numbers listed so the work can be checked or repeated.

  1. Sep 20143,082 mi

    First oil changes

    First three at Rowe Ford, where the truck was bought: 3,082, 5,204 and 9,344 miles. Motorcraft 10W-30.

  2. 2015–2021

    Oil changes, done by the owner

    Motorcraft filters and Motorcraft 10W-30, later 5W-40. Switched to Amsoil Signature Series 5W-40 at 81,000 miles and stayed on it.

    FL-2051SAmsoil SS 5W-40
  3. Feb 2022~125k mi

    Fuel conditioning module Preventive

    BC3Z-9C089-AMotorcraft FD-4615
  4. Feb 2022~125–138k mi

    Front end rebuild after an accident

    Coastal Autoworks, Warren ME. Radius arms, track bar, steering gear box, drag link and tie rods, a hub and bearing, three ball joints (two passenger side, one driver side), two wheels, and Bilstein 5100 shocks all around. The front axle shafts were upgraded to 2017+ parts at the same time.

    GC3Z-3A360-A/BHC3Z-3B239-CGC3Z-3504-EBC3Z-3304-AHC3Z-3A131-B/D/HDC3Z-1104-ABC3Z-3050-B/CBC3Z-3049-BBilstein 24-186018
  5. Apr 2022

    Rear diff cover and gear oil Upgrade

    Banks Ram-Air differential cover for the Sterling 10.25, filled with Amsoil 75W-140. Driver side wheel bearing and hub replaced the same month.

    Banks 19258-F140
  6. 2023

    Oil pan reseal

    Lower pan resealed for a seep.

    Motorcraft TA-31 RTV
  7. 2023

    Heavier front springs and spring seats Preventive

    Ford's snow plow package front springs, plus new spring buckets, reattached with Grade 8 hardware.

  8. 2024~220k mi

    Passenger side collision repair

    Front door, rear half door and mirror replaced with Ford parts and refinished. No frame or structural damage.

  9. 2025

    Cooling and steering

    Water pump for a seal leak, upper and lower radiator hoses, serpentine belt, and passenger outer tie rod.

    BC3Z-8501-ABC3Z-8260-CBC3Z-8286-BBC3Z-8620-FBC3Z-3A130-C
  10. May 2025

    Hot side boost tube, windshield, inspection

    New OEM hot side boost tube from Quirk. Windshield replaced with OEM Carlite glass after a dump truck dropped a rock. Safety inspection passed, new sticker.

  11. Late 2025

    Front hubs and brakes

    Front hubs and seals, front calipers, rotors and pads.

  12. Feb–Mar 2026~240k mi

    Rear leaf springs

    Both rear packs replaced with full new packs after a main leaf broke.

  13. Mar 2026
    Transmission control moduleGlow plug control module

    Transmission and glow plug modules

    Motorcraft TCM from Quirk, installed and programmed with our own VCM II and Ford IDS. Glow plug control module from Fairway a week or two later.

    BC3Z-7Z369-FFT-190BC3Z-12B533-ADY-1261
  14. Nov 2026

    Boost tubes, sensors and 4x4

    Banks cold side boost tube with the charge air temp sensor. Transfer case shift motor replaced. Driver front caliper and pads replaced.

    Banks 26019Motorcraft MP1628
The build

Mods

    On the bench

    In progress

    • Auto-locking hubs: new vacuum solenoid and hub vacuum tube
    • Fresh factory O-ring for the cold side coupler
    • Banks hot side boost tube
    • All four corners of brakes in Motorcraft, spring 2027
    • Transmission pan gasket
    Bluey, a dark blue 2014 Ford F-350 SuperCab FX4, parked under the Peaslee's Quick Stop sign
    Shop list

    To do

    Tick things off as they get done. Checkmarks are saved in this browser only.

    Now

    • BC3Z-8590-DWhen the new factory ring arrives. Clean the groove with brake clean, light film of silicone grease, ring flat and not rolled. Should take firm push to seat. Reuse the snap ring that comes off.
    • Ask what cold side ring fits 2011–16 (their #65 is too fat), and the coupler groove size: ID and cross-section.
    • see DiagramsSolenoid, main tube, then regulator and short line once confirmed. One section at a time; photograph clips first.
    • Needs the Toughbook with the VCM II. Looking for C1979, P1867, P1812. Wrench light comes and goes.
    • Driver side inner was down to metal from a sticking caliper.
    • 2 zerksWith Chandler's grease gun.

    Spring 2027

    • at Silas's liftPads, rotors, calipers as needed. Free the seized front bracket bolts (21mm, M16-2.0).
    • Helicoil the holes with the snapped bolts. Other pan bolts already stainless.
    • With Orion.

    Keep an eye on

    • every 10kTwo passenger side and one driver side were replaced in 2022.
    • each oil change
    • yearly
    • monitorNo symptoms. DCR conversion was on the plan.
    Fairway Ford Parts · Quirk Ford · Wiscasset Ford

    Parts to order

    Genuine Ford / Motorcraft. Order auto-hub parts by part number, not VIN: the build data says manual hubs, so Ford's site rejects them.

    Add a part by number

    Type a Ford part number like BC3Z-8590-D and press Add.

      Hub vacuum

      • 7L1Z-9H465-BDiagram callout 9H465.
      • BC3Z-3C124-ADiagram callout 3C124. Fits auto-hub 2014 F-350s (checked against VIN 1FT8W3BTXEEB39069).
      • PC3Z-9F490-AMotorcraft CX2737, replaces BC3Z-9F490-A. Confirm with Nate
      • BC3Z-7A784-?Suffix not confirmed (-A or -B). The photo may already include the regulator puck. Confirm with Nate

      Spring brake job

      • FMSI D1680Motorcraft number to look up at the counter.

      Only if needed

      • 85 × 5 mm FKMOnly if the new factory ring still goes in loose. Wait for Banks' groove size first.
      • Elring 098.86084.2 × 4.3 mm Viton, same as BC3Z-8590-D (now discontinued). Motorcraft RTS-1071.
      Waiting on

      Parts on order

      Ordered and on the way.

      Cold side outlet duct seal (O-ring)

      BC3Z-8590-D
      Ordered
      Nov 16, 2026
      From
      Bill McCandless Ford, via eBay
      Price
      $16.25, free shipping
      For
      Banks cold side coupler at the throttle body (diagram #7)
      Note
      Discontinued by Ford. Last one this seller had.
      Ford diagram F0223800-01

      Diagrams

      Auto-locking hub vacuum routing. Solenoid and regulator at the top, main tube down to a T, then a short hose at each front knuckle.

      Ford diagram of the auto-locking hub vacuum system: solenoid 9H465 and regulator 9F490 at the top, main tube 3C124 running down and splitting to both front knuckles, with short 3C125 hoses at each knuckle.

      Callouts

      • 9H465Hub lock solenoid7L1Z-9H465-B
      • 3C124Main hub vacuum tubeBC3Z-3C124-A
      • 9F490Vacuum regulator (on the hub circuit)PC3Z-9F490-A
      • 7A784Short line, solenoid to regulatorBC3Z-7A784-?
      • 3C125Knuckle hoses (x2)7C3Z-3C125-A

      Install notes

      1. Photograph every clip and tie point on the old run before pulling anything.
      2. Lay the new tube beside the old one and match the ends: solenoid end, T, each knuckle.
      3. Swap one section at a time. Unclip old, clip new in the same spots.
      4. Test: hubs on Auto, shift to 4H, tight turn. It should bind, and the wrench light should stay off after a few drives.
      5. The system needs at least 10 inHg to engage; disengage happens around 6–7 inHg.
      From the event log, receipts and oil reports

      Completed

      Finished work, newest first. Anything you check off on To do or mark Installed on Diagrams shows up at the top.

      Checked off

      • Nothing checked off yet.

      2026

      • Nov 2026
        Transfer case shift motor
        Swapped at Silas's garage. 4WD engages with hubs locked by hand.
        Motorcraft MP1628
      • Nov 2026
        Banks cold side boost tube + charge air temp sensor
        Sensor locked into the Banks tube and reading fine. New coupler snap rings from Quirk (one installed, one in the glove box). Banks CARB E.O. label D-161-163 on the underside of the hood.
        Banks 26019CARB E.O. D-161-163
        Banks cold side boost tube installed in the engine bayBanks CARB E.O. D-161-163 boost tubes label under the hood
      • Nov 2026
        Driver front caliper and pads
        Inner pad was to metal from a sticking caliper. Rotor and bracket left for spring (bracket bolts seized).
      • Nov 2026
        Under-hood vacuum fittings and hoses
      • Mar 2026a week or two after the TCM
        Glow plug control module, three-connector aluminum unit
        Glow plug control module (GPCM)
        No glow light / lost communication. Ordered from Fairway Ford Parts, installed ourselves.
        BC3Z-12B533-AMotorcraft DY-1261
      • Mar 2026
        Transmission control module, finned aluminum case with Ford label
        Transmission control module (TCM)
        Communication drops and refused programming. New Motorcraft TCM from Quirk Ford of Augusta, installed and programmed ourselves with our own Rotunda VCM II and Ford IDS (FORScan license on hand too).
        BC3Z-7Z369-FMotorcraft FT-190
      • Feb–Mar 2026
        Rear leaf spring packs
        Full new packs after a main leaf broke.

      2025

      • Late 2025
        Front hubs and seals, front brakes
        Hubs done with Orion. Front calipers, rotors and pads.
      • May 2025
        Windshield, OEM Carlite
        A dump truck dropped a rock. Replaced with Ford's OEM Carlite glass.
      • May 2025
        State safety inspection
        Passed, new sticker.
      • May 2025
        Hot side boost tube
        New OEM tube from Quirk Ford of Augusta.
      • 2025
        Passenger outer tie rod
        Wear / steering play.
        BC3Z-3A130-CMotorcraft MEOE-205
      • 2025
        Water pump, radiator hoses, serpentine belt
        Water pump for a seal leak. Upper and lower hoses and belt replaced while in there.
        BC3Z-8501-APW-538BC3Z-8260-CKM-5053BC3Z-8286-BKM-5054BC3Z-8620-FJK8-1250
      • Sep 2025223,000 mi
        Oil change + Blackstone sample
        Amsoil Signature Series 5W-40, 6,000 mi run. All normal.

      2024

      • 2024~220k mi
        Passenger side collision repair
        Front door, rear half door and mirror replaced with Ford parts, refinished. No frame damage.

      2023

      • 2023
        Heavier front springs and spring buckets
        Ford snow plow package springs. New spring seats, reattached with Grade 8 hardware.
      • 2023
        Oil pan reseal
        Motorcraft TA-31 RTV
      • Aug 2023185,000 mi
        Oil change + Blackstone sample
        Synthetic 5W-40, 7,000 mi run. Iron 15 ppm, normal for the interval.

      2022

      • Apr 2022
        Windshield
        Rock chip. Safelite, Augusta.
      • Apr 2022
        Driver side wheel bearing and hub
        Coastal Autoworks.
      • Apr 2022
        Banks rear diff cover + Amsoil 75W-140
        Sterling 10.25.
        Banks 19258-F140
      • Feb 2022
        Front end rebuild after an accident
        Coastal Autoworks, Warren ME. Radius arms, track bar, steering box, drag link, tie rods, hub, three ball joints (2 passenger, 1 driver), two wheels, Bilstein 5100s. 2017+ front axle shafts supplied by us.
        GC3Z-3A360-A/BHC3Z-3B239-CGC3Z-3504-EBC3Z-3304-AHC3Z-3A131-B/D/HDC3Z-1104-A
      • 2022~125k mi
        Fuel conditioning module
        Preventive. Done with a Pittsburgh 32mm impact-rated socket on a 1/2" Pittsburgh ratchet.
        BC3Z-9C089-AMotorcraft FD-4615
      • 2021–2022
        Oil changes + 8 Blackstone samples
        94,307 to 165,203 mi, 2,600–4,800 mi runs. See the oil table on Home.

      2014–2021

      • ~202181,000 mi
        Switched to Amsoil Signature Series 5W-40
        Every oil change since.
      • 2015–2021
        Oil changes, done ourselves
        Motorcraft filters, Motorcraft 10W-30, then 5W-40.
        FL-2051S
      • 2014–15
        First three oil changes
        Rowe Ford, where the truck was bought. Motorcraft 10W-30, at 3,082 / 5,204 / 9,344 mi.
      In the box

      Tools used

      What's in the box and what it's been used on. Add a tool with the form at the bottom. It saves to the page, so it's there on every device.

      • Loading tools…

      Add a tool